GigaView Trial License for 90 Days

Welcome to GigaView. This guide will help you install and run your 90-day trial of GigaView on a Dell GB10.

By running the script, you accept the underlying licenses of the third parties listed in the script. If you do not accept the underlying licenses, you must delete the script before running it.

Pre-requisite

  • Dell GB10 with factory installation, Internet connection (wired or Wi-Fi), Monitor, Keyboard and Mouse

  • USB Stick with USB-C connector to Sanitize the GB10 (see below)

Installation, Download & Acceptance

By downloading the script, you accept the License Terms. Download the script by clicking on the link from the GB10 and using the provided password: Script link

Run the following command in the GB10 terminal (you will need to enter user password a few times during installation)

  • cd Downloads

  • mv installGigaView.txt installGigaView.sh

  • chmod +x installGigaView.sh

  • ./installGigaView.sh

  • Run GigaView in a local browser with http://localhost:3080 or remotely with http://<GB10_IPADDRESS>:3080 (replace GB10_IPADDRESS with its IP address).

  • Only the model Ollama gemma4:31b and gpt-oss:120B are downloaded, make sure you select them in the drop down menu. You can download others.

Sanitize the Dell GB10 after 90 days

Before the expiration of the Trial License, if a new Trial License is available or if you don't have a freshly installed GB10, you undertake to sanitize the GB10.

  1. Download the GB10 ISO onto a windows 11 system at this link

  2. Install Rufus software to write the ISO on a usb stick

  3. Press F7 repeatedly at boot and use the BIOS feature to sanitize the SSD

    1. Method Type  Purge, Command Type: Format and Secure Erase Setting: None

  4. Insert usb stick once sanitization is complete

  5. Select save and Exit to reboot

  6. Press F7 repeatedly at boot to select the usb stick to boot

  7. Select all the default option